 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CHIP ATTENUATORS KAMAYA OHM RAC10 1A, RAC16 1A, 2A *Features 1. The RAC10 1A and RAC16 1A, 2A Series are small size chip attenuators, suitable for high density surface packaging. 2.Suitable for use as DC and up to UHF band frequencies. 3.Similar foot print for chip resistor networks. 4.Standard impedance of 50 ohm and 75 ohm are available up to 600 ohm available on request. 5.Replaces conventional attenuation circuits with one chip in place of three discrete resistors. *Dimensions and Circuit a 1 2 b Q 1 W Q 2 a RAC16 : Impedance on Termination 1 Attenuation factor on Termination 3 Dot mark on Termination 4 RAC10 : Dot mark on Termination 1 Attenuation factor on Termination 2 to 3 Circuit 4 3 H 4 3 H W b 1 2 P L RAC16 1A, 2A Style Terminal Style RAC10 1A C A RAC16 1A.2A L 1.00.05 1.60.1 W 1.00.05 1.60.1 P 4 3 L RAC10 1A Unbalanced Q 0.330.10 0.5 0.1 a 0.150.10 0.250.10 b 0.25 +0.05 -0.10 0.25 +0.15 -0.10 *P 0.65 0.8 Type Unit : mm H 0.350.10 0.55 +0.05 -0.10 *Unit weight/pc. 1.1mg 3.5mg *Values for reference *Product Classification Example RAC Product Type 10 Size Style 1 Characteristic Impedance A Circuits 1 Attenuation Factor Attenuation Factor Code Attenuation Factor X 0.5dB 1 1dB 2 2dB 3 3dB 4 4dB 5 5dB 6 6dB 7 7dB 8 8dB 9 9dB A 10dB B 11dB C 12dB Code D 13dB A E 14dB F 15dB C G 16dB L 20dB C Terminal Style TH Packaging * Packaging Code Packaging B Bulk(Loose Packaging) TP Paper Tape. TH Paper Tape.(2mm pitch) *Refer to Taping and Packaging information in page 34.35 Product Type Size Code Width 10 1.0mm 16 1.6mm Characteristic Impedance Code Characteristic Impedance 1 50 ohm 2 75 ohm Application RAC10.16 RAC16 RAC10 Circuits Code Circuits A Unbalanced Type Terminal Style Termination Style Application Without corner RAC16 Type With corner RAC10 30 KAMAYA OHM CHIP ATTENUATORS RAC10 1A, RAC16 1A, 2A *Ratings Style Characteristic Impedance Attenuation dB 0.5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 20 1 2 3 6 10 1 2 3 6 10 Attenuation Factor Tolerance dB 0.1 Attenuation Range DCf3GHz VSWR Voltage standing wave Ratio 1.1max. Rated Input Power mW/element Category Temperature Range C 0.3 0.4 0.75 DC f 1.5GHz 1.5GHz < f 3GHz 1.2max. 1.3max. RAC10 1A 50 ohm 0.8 100 -40+125 RAC16 1A 50 ohm RAC16 2A 75 ohm 2.5 0.3 0.3 0.5 0.75 0.75 0.3 0.3 0.5 0.75 DC f 3GHz 1.3max. DC f 3GHz 1.2max. *The following information is available. 1. 0dB attenuation. 2. Test methods for Attenuation Factor and VSWR characteristics. *Performance Characteristics Description 0.5-2dB Characteristic impedance 50 ohm, 75 ohm JIS C 5201-1 : 1998 Requirements 3dB-5dB 6dB-20dB Measuring Circuit 1 Test Methods 2 R1 R2 4 R2 3 RL RL=50 ohm 75 ohm Insulation resistance Solderability Resistance to soldering heat Rapid change of temperature At least 100M ohm In accordance with Clause 4.17.4.5 Within0.1dB Within0.2dB Within0.3dB 50Vd.c., 60s Clause 4.17 Dip into 235C solder bath for 2s. Clause 4.18 Dip into 260C solder bath for 5s. No major visible damage. Within0.1dB Within0.2dB Within0.3dB Clause 4.19 5 cycles between -55C and +125C No major visible damage. Within0.1dB Within0.2dB Within0.3dB Clause 4.25.1 Rated voltage, 1.5h"ON", 0.5h"OFF" 85C, 1000h. Endurance at 85C Bend strength of the face plating Within0.1dB Within0.2dB Within0.3dB Clause 4.33 Amount of bend 3mm, 10s 31 |
Price & Availability of RAC161ADATP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |